Authors
Hazry Desa1, Muhammad Azizi bin Azizan1, Mohamad Syafiq Abdul Khadir1,
*, Muhammad Safwan Suhaimi1, Noor Zulaiha Ramli1, Zainudin Hat2
1Centre of Excellence for Unmanned Aerial System (COEUAS), Universiti Malaysia
Perlis (UniMAP), Kangar, Perlis, Malaysia
2IP Fokus Sdn Bhd, Bandar Baru Bangi, Selangor, Malaysia
*Corresponding author. Email: [email protected]
Corresponding Author
Mohamad Syafiq Abdul Khadir
Received 21 November 2018, Accepted 2 December 2018, Available Online 10
September 2019.
DOI
https://doi.org/10.2991/jrnal.k.190828.003
Keywords
UAV; engineering work; land survey; drone
Abstract
Unmanned Aerial Vehicle (UAV) are widely used in numerous field and the
technology keeps growing. Generally, conventional method used in data collection
for engineering work is tedious and requires a lot of manpower. This research
focuses on the investigation of the suitability of UAV for route survey.
Three stages involved: data collection, data processing and data analysis.
By using Kama Beta, the data was collected. For data processing, Pix4D
Mapper is used for point cloud and AutoCAD 2014 for the analysis stage.
The result is mainly focused on extracting the road profile and test the
point cloud data using Root Mean Square Error (RMSE). The result from both
methods, conventional and UAV from the point cloud data using RMSE show
only the small difference, with only 6.67% from total 60 points out of
tolerance.
Copyright
© 2019 The Authors. Published by
Open Access
This is an open access article distributed under the CC BY-NC 4.0 license
(http://creativecommons.org/licenses/by-nc/4.0/).