Authors
Qunpo Liu1, *, Manli Wang1, Gaowei Wang1, Ruxin Gao1, Naohiko Hanajima2
1Department of Robotics Engineering, Henan Polytechnic University, 2001
Century Avenue, Jiaozuo, Henan 454003, P. R. China
2College of Information and Systems, Muroran Institute of Technology, 27-1
Mizumoto-cho, Hokkaido, Muroran-shi, Hokkaido 050-8585, Japan
*Corresponding author. Email: [email protected]
Corresponding Author
Qunpo Liu
Received 15 October 2019, Accepted 13 June 2020, Available Online 16 September
2020.
DOI
https://doi.org/10.2991/jrnal.k.200909.015
Keywords
Micro-precision glass encapsulated electrical connectors; manual inspection;
surface defect inspection; feature extraction
Abstract
A miniature precision glass encapsulated electrical connectors introduced
by glass powder and metal wires through a special complicated process.
Aiming at the porosity defects on the surface, a defect detection algorithm
propose based on threshold segmentation and feature extraction. Pre-operation,
global threshold segmentation processing and feature extraction (based
on area, circularity aspect ratio, compactness, and contour length) are
preformed to detect the defects. Experimental results show that the algorithm
can accurately identify porosities defects.
Copyright
© 2020 The Authors. Published by ALife Robotics Corp. Ltd.
Open Access
This is an open access article distributed under the CC BY-NC 4.0 license
(http://creativecommons.org/licenses/by-nc/4.0/).